Osmocom Open Build Service

osmo-bsc.spec Changed

@@ -17,14 +17,14 @@
 %define _lto_cflags %{nil}
 
 Name:           osmo-bsc
-Requires: osmocom-nightly = 202309130026
-Version: 1.11.0.1.c4b330.202309130026
+Requires: osmocom-nightly = 202309140026
+Version: 1.11.0.6.c3446.202309140026
 Release:        0
 Summary:        OsmoBSC: Osmocom's Base Station Controller for 2G CS mobile networks
 License:        AGPL-3.0-or-later AND GPL-2.0-or-later
 Group:          Hardware/Mobile
 URL:            https://osmocom.org/projects/osmobsc
-Source: osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz
+Source: osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz
 Source1: rpmlintrc
 BuildRequires:  automake >= 1.9
 BuildRequires:  libtool >= 2
@@ -49,7 +49,7 @@
 OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks.
 
 %package abisip-find
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Summary:        CLI utility to find ip.access compatible BTS
 License:        GPL-2.0-or-later
 Group:          Productivity/Telephony/Utilities
@@ -58,7 +58,7 @@
 Command line utility to find ip.access compatible BTS.
 
 %package ipaccess-utils
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Summary:        Command line utilities for ip.access nanoBTS
 License:        GPL-2.0-or-later
 Group:          Productivity/Telephony/Utilities
@@ -69,7 +69,7 @@
 and ipaccess-proxy.
 
 %package bs11-utils
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Summary:        Command line utilities for Siemens BS-11 BTS
 License:        GPL-2.0-or-later
 Group:          Productivity/Telephony/Utilities
@@ -80,7 +80,7 @@
 public telephone network as frequency standard for the E1 line.
 
 %package meas-utils
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Summary:        Command line utilities for OsmoBSC's measurement reports
 License:        GPL-2.0-or-later
 Group:          Productivity/Telephony/Utilities

osmo-bsc_1.11.0.1.c4b330.202309130026.dsc -> osmo-bsc_1.11.0.6.c3446.202309140026.dsc Changed

@@ -2,7 +2,7 @@
 Source: osmo-bsc
 Binary: osmo-bsc, osmo-bsc-dbg, abisip-find, osmo-bsc-ipaccess-utils, osmo-bsc-bs11-utils, osmo-bsc-meas-utils, osmo-bsc-doc
 Architecture: any all
-Version: 1.11.0.1.c4b330.202309130026
+Version: 1.11.0.6.c3446.202309140026
 Maintainer: Osmocom team <openbsc@lists.osmocom.org>
 Homepage: https://projects.osmocom.org/projects/osmo-bsc
 Standards-Version: 3.9.8
@@ -18,8 +18,8 @@
  osmo-bsc-ipaccess-utils deb net extra arch=any
  osmo-bsc-meas-utils deb net extra arch=any
 Checksums-Sha1:
- 0ed56d1fd0360d26e487c6efee44068da07b7602 616912 osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz
+ cda57a0b6b24ad8612a76d3c4ee12c6b0206ca92 617460 osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz
 Checksums-Sha256:
- 95fc4fbae27cc2b1daeb4ea3d16361f75eda9951b296860c4e26ba8ab39fbb25 616912 osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz
+ 0659f69087817b1f4df28de2a170a4123394328225918aff763f2eadcc340d07 617460 osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz
 Files:
- e1cb7d6a3c1da673611cfd1d1b9e60cd 616912 osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz
+ c8c20fcb369923ea1bd31381b869e476 617460 osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/.tarball-version -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/.tarball-version Changed

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/contrib/osmo-bsc.spec.in -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/contrib/osmo-bsc.spec.in Changed

@@ -17,7 +17,7 @@
 %define _lto_cflags %{nil}
 
 Name:           osmo-bsc
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Version:        @VERSION@
 Release:        0
 Summary:        OsmoBSC: Osmocom's Base Station Controller for 2G CS mobile networks
@@ -48,7 +48,7 @@
 OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks.
 
 %package abisip-find
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Summary:        CLI utility to find ip.access compatible BTS
 License:        GPL-2.0-or-later
 Group:          Productivity/Telephony/Utilities
@@ -57,7 +57,7 @@
 Command line utility to find ip.access compatible BTS.
 
 %package ipaccess-utils
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Summary:        Command line utilities for ip.access nanoBTS
 License:        GPL-2.0-or-later
 Group:          Productivity/Telephony/Utilities
@@ -68,7 +68,7 @@
 and ipaccess-proxy.
 
 %package bs11-utils
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Summary:        Command line utilities for Siemens BS-11 BTS
 License:        GPL-2.0-or-later
 Group:          Productivity/Telephony/Utilities
@@ -79,7 +79,7 @@
 public telephone network as frequency standard for the E1 line.
 
 %package meas-utils
-Requires: osmocom-nightly = 202309130026
+Requires: osmocom-nightly = 202309140026
 Summary:        Command line utilities for OsmoBSC's measurement reports
 License:        GPL-2.0-or-later
 Group:          Productivity/Telephony/Utilities

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/debian/changelog -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/debian/changelog Changed

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/debian/control -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/debian/control Changed

@@ -26,7 +26,7 @@
 Package: osmo-bsc
 Architecture: any
 Multi-Arch: foreign
-Depends: osmocom-nightly (= 202309130026), ${misc:Depends}, ${shlibs:Depends}
+Depends: osmocom-nightly (= 202309140026), ${misc:Depends}, ${shlibs:Depends}
 Recommends: osmo-mgw
 Description: OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks
 
@@ -34,19 +34,19 @@
 Section: debug
 Architecture: any
 Multi-Arch: same
-Depends: osmocom-nightly (= 202309130026), osmo-bsc (= ${binary:Version}), ${misc:Depends}
+Depends: osmocom-nightly (= 202309140026), osmo-bsc (= ${binary:Version}), ${misc:Depends}
 Description: OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks
 
 Package: abisip-find
 Architecture: any
 Multi-Arch: foreign
-Depends: osmocom-nightly (= 202309130026), ${misc:Depends}, ${shlibs:Depends}
+Depends: osmocom-nightly (= 202309140026), ${misc:Depends}, ${shlibs:Depends}
 Description: Command line utility to find ip.access compatible BTS
 
 Package: osmo-bsc-ipaccess-utils
 Architecture: any
 Multi-Arch: foreign
-Depends: osmocom-nightly (= 202309130026), ${misc:Depends}, ${shlibs:Depends}
+Depends: osmocom-nightly (= 202309140026), ${misc:Depends}, ${shlibs:Depends}
 Description: Command line utilities for ip.access nanoBTS
  This package contains utilities that are specific for nanoBTS when being used
  together with OpenBSC. It contains mainly two tools: ipaccess-config and ipaccess-proxy.
@@ -54,7 +54,7 @@
 Package: osmo-bsc-bs11-utils
 Architecture: any
 Multi-Arch: foreign
-Depends: osmocom-nightly (= 202309130026), ${misc:Depends}, ${shlibs:Depends}
+Depends: osmocom-nightly (= 202309140026), ${misc:Depends}, ${shlibs:Depends}
 Description: Command line utilities for Siemens BS-11 BTS
  There is a tool in this package for configuring the Siemens BS-11 BTS.
  Additionally, it contains one tool for making use of an ISDN-card and the
@@ -63,14 +63,14 @@
 Package: osmo-bsc-meas-utils
 Architecture: any
 Multi-Arch: foreign
-Depends: osmocom-nightly (= 202309130026), ${misc:Depends}, ${shlibs:Depends}
+Depends: osmocom-nightly (= 202309140026), ${misc:Depends}, ${shlibs:Depends}
 Description: Command line utilities to manage measurement reports.
 
 Package: osmo-bsc-doc
 Architecture: all
 Section: doc
 Priority: optional
-Depends: osmocom-nightly (= 202309130026), ${misc:Depends}
+Depends: osmocom-nightly (= 202309140026), ${misc:Depends}
 Description: ${misc:Package} PDF documentation
  Various manuals: user manual, VTY reference manual and/or
  protocol/interface manuals.

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/include/osmocom/bsc/abis_nm.h -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/include/osmocom/bsc/abis_nm.h Changed

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/include/osmocom/bsc/bts_ipaccess_nanobts_omlattr.h -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/include/osmocom/bsc/bts_ipaccess_nanobts_omlattr.h Changed

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/src/osmo-bsc/abis_nm.c -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/src/osmo-bsc/abis_nm.c Changed

@@ -52,11 +52,15 @@
 #include <osmocom/bsc/nm_common_fsm.h>
 #include <osmocom/gsm/bts_features.h>
 #include <osmocom/bsc/ipaccess.h>
+#include <osmocom/bsc/bts_ipaccess_nanobts_omlattr.h>
 
 #define OM_ALLOC_SIZE		1024
 #define OM_HEADROOM_SIZE	128
 #define IPACC_SEGMENT_SIZE	245
 
+/* max number of SW Description IEs we can parse */
+#define SW_DESCR_MAX		5
+
 #define LOGPMO(mo, ss, lvl, fmt, args ...) \
 	LOGP(ss, lvl, "OC=%s(%02x) INST=(%02x,%02x,%02x): " fmt, \
 	     get_value_string(abis_nm_obj_class_names, (mo)->obj_class), \
@@ -560,6 +564,45 @@
 	return ari + num_unreported + 1; /* we have to account for 1st byte with number of unreported attributes */
 }
 
+/* Parse Attribute Response Info content for 3GPP TS 52.021 §9.4.30 Manufacturer Id */
+static void parse_osmo_bts_features(struct gsm_bts *bts,
+				    const uint8_t *data, uint16_t data_len)
+{
+	/* log potential BTS feature vector overflow */
+	if (data_len > sizeof(bts->_features_data)) {
+		LOGPMO(&bts->mo, DNM, LOGL_NOTICE,
+		       "Get Attributes Response: feature vector is truncated "
+		       "(from %u to %zu bytes)\n", data_len, sizeof(bts->_features_data));
+		data_len = sizeof(bts->_features_data);
+	}
+
+	/* check that max. expected BTS attribute is above given feature vector length */
+	if (data_len > OSMO_BYTES_FOR_BITS(_NUM_BTS_FEAT)) {
+		LOGPMO(&bts->mo, DNM, LOGL_NOTICE,
+		       "Get Attributes Response: reported unexpectedly long (%u bytes) "
+		       "feature vector - most likely it was compiled against newer BSC headers. "
+		       "Consider upgrading your BSC to later version.\n", data_len);
+	}
+
+	memcpy(bts->_features_data, data, data_len);
+	bts->features_known = true;
+
+	/* Log each BTS feature in the reported vector */
+	for (unsigned int i = 0; i < data_len * 8; i++) {
+		if (!osmo_bts_has_feature(&bts->features, i))
+			continue;
+
+		if (i >= _NUM_BTS_FEAT) {
+			LOGPMO(&bts->mo, DNM, LOGL_NOTICE,
+			       "Get Attributes Response: unknown feature 0x%02x is supported\n", i);
+		} else {
+			LOGPMO(&bts->mo, DNM, LOGL_NOTICE,
+			       "Get Attributes Response: feature '%s' is supported\n",
+			       osmo_bts_features_name(i));
+		}
+	}
+}
+
 /* Handle 3GPP TS 52.021 §8.11.3 Get Attribute Response (with nanoBTS specific attribute formatting) */
 static int parse_attr_resp_info_attr(struct gsm_bts *bts, const struct gsm_bts_trx *trx, struct abis_om_fom_hdr *foh, struct tlv_parsed *tp)
 {
@@ -570,42 +613,22 @@
 	uint16_t port;
 	struct in_addr ia = {0};
 	char unit_id40;
-	struct abis_nm_sw_desc sw_descrMAX_BTS_ATTR;
-
-	/* Parse Attribute Response Info content for 3GPP TS 52.021 §9.4.30 Manufacturer Id */
-	if (bts->type == GSM_BTS_TYPE_OSMOBTS && TLVP_PRES_LEN(tp, NM_ATT_MANUF_ID, 2)) {
-		len = TLVP_LEN(tp, NM_ATT_MANUF_ID);
-
-		/* log potential BTS feature vector overflow */
-		if (len > sizeof(bts->_features_data)) {
-			LOGPMO(&bts->mo, DNM, LOGL_NOTICE, "Get Attributes Response: feature vector is truncated "
-			       "(from %u to %zu bytes)\n", len, sizeof(bts->_features_data));
-			len = sizeof(bts->_features_data);
-		}
 
-		/* check that max. expected BTS attribute is above given feature vector length */
-		if (len > OSMO_BYTES_FOR_BITS(_NUM_BTS_FEAT)) {
-			LOGPMO(&bts->mo, DNM, LOGL_NOTICE, "Get Attributes Response: reported unexpectedly long (%u bytes) "
-			       "feature vector - most likely it was compiled against newer BSC headers. "
-			       "Consider upgrading your BSC to later version.\n", len);
+	switch (bts->type) {
+	case GSM_BTS_TYPE_OSMOBTS:
+		if (TLVP_PRES_LEN(tp, NM_ATT_MANUF_ID, 2)) {
+			parse_osmo_bts_features(bts, TLVP_VAL(tp, NM_ATT_MANUF_ID),
+						     TLVP_LEN(tp, NM_ATT_MANUF_ID));
 		}
-
-		memcpy(bts->_features_data, TLVP_VAL(tp, NM_ATT_MANUF_ID), len);
-		bts->features_known = true;
-
-		/* Log each BTS feature in the reported vector */
-		for (i = 0; i < len * 8; i++) {
-			if (!osmo_bts_has_feature(&bts->features, i))
-				continue;
-
-			if (i >= _NUM_BTS_FEAT)
-				LOGPMO(&bts->mo, DNM, LOGL_NOTICE, "Get Attributes Response: unknown feature 0x%02x is"
-				       " supported\n", i);
-			else
-				LOGPMO(&bts->mo, DNM, LOGL_NOTICE, "Get Attributes Response: feature '%s' is"
-				       " supported\n", osmo_bts_features_name(i));
+		/* fall-through */
+	case GSM_BTS_TYPE_NANOBTS:
+		if (TLVP_PRESENT(tp, NM_ATT_IPACC_SUPP_FEATURES)) {
+			ipacc_parse_supp_features(bts, foh, TLVP_VAL(tp, NM_ATT_IPACC_SUPP_FEATURES),
+							    TLVP_LEN(tp, NM_ATT_IPACC_SUPP_FEATURES));
 		}
-
+		break;
+	default:
+		break;
 	}
 
 	/* Parse Attribute Response Info content for 3GPP TS 52.021 §9.4.28 Manufacturer Dependent State */
@@ -617,6 +640,7 @@
 
 	/* Parse Attribute Response Info content for 3GPP TS 52.021 §9.4.61 SW Configuration */
 	if (TLVP_PRESENT(tp, NM_ATT_SW_CONFIG)) {
+		struct abis_nm_sw_desc sw_descrSW_DESCR_MAX;
 		data = TLVP_VAL(tp, NM_ATT_SW_CONFIG);
 		len = TLVP_LEN(tp, NM_ATT_SW_CONFIG);
 		/* after parsing manufacturer-specific attributes there's list of replies in form of sw-conf structure: */
@@ -728,7 +752,7 @@
 	struct tlv_parsed tp;
 	const uint8_t *sw_config;
 	int ret, sw_config_len, len;
-	struct abis_nm_sw_desc sw_descrMAX_BTS_ATTR;
+	struct abis_nm_sw_desc sw_descrSW_DESCR_MAX;
 
 	DEBUGPFOH(DNM, foh, "Software Activate Request, ACKing and Activating\n");

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/src/osmo-bsc/bts_ipaccess_nanobts_omlattr.c -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/src/osmo-bsc/bts_ipaccess_nanobts_omlattr.c Changed

@@ -26,6 +26,73 @@
 #include <osmocom/bsc/bts.h>
 #include <osmocom/gsm/bts_features.h>
 
+const struct tlv_definition ipacc_eie_tlv_def = {
+	.def = {
+		/* TODO: add more values from enum ipac_eie */
+		NM_IPAC_EIE_FREQ_BANDS	= { TLV_TYPE_TL16V },
+		NM_IPAC_EIE_MAX_TA		= { TLV_TYPE_TL16V },
+		NM_IPAC_EIE_CIPH_ALGOS	= { TLV_TYPE_TL16V },
+		NM_IPAC_EIE_CHAN_TYPES	= { TLV_TYPE_TL16V },
+		NM_IPAC_EIE_CHAN_MODES	= { TLV_TYPE_TL16V },
+		NM_IPAC_EIE_GPRS_CODING	= { TLV_TYPE_TL16V },
+		NM_IPAC_EIE_RTP_FEATURES	= { TLV_TYPE_TL16V },
+		NM_IPAC_EIE_RSL_FEATURES	= { TLV_TYPE_TL16V },
+	}
+};
+
+static inline uint32_t ipacc_parse_supp_flags(const struct abis_om_fom_hdr *foh,
+					      const struct value_string *flags,
+					      const struct tlv_p_entry *e,
+					      const char *text)
+{
+	uint32_t u32 = 0;
+
+	for (unsigned int i = 0; i < OSMO_MAX(e->len, 4); i++)
+		u32 |= e->vali << (i * 8);
+	for (const struct value_string *vs = flags; vs->value && vs->str; vs++) {
+		if (u32 & vs->value)
+			LOGPFOH(DNM, LOGL_DEBUG, foh, "%s '%s' is supported\n", text, vs->str);
+	}
+
+	return u32;
+}
+
+/* Parse ip.access Supported Features IE */
+int ipacc_parse_supp_features(const struct gsm_bts *bts,
+			      const struct abis_om_fom_hdr *foh,
+			      const uint8_t *data, uint16_t data_len)
+{
+	const struct tlv_p_entry *e;
+	struct tlv_parsed tp;
+
+	if (tlv_parse(&tp, &ipacc_eie_tlv_def, data, data_len, 0, 0) < 0) {
+		LOGPFOH(DNM, LOGL_ERROR, foh, "%s(): tlv_parse failed\n", __func__);
+		return -EINVAL;
+	}
+
+	/* TODO: store the flags in the respective MO state */
+	if ((e = TLVP_GET(&tp, NM_IPAC_EIE_FREQ_BANDS)) != NULL)
+		ipacc_parse_supp_flags(foh, abis_nm_ipacc_freq_band_desc, e, "Freq. band");
+	if ((e = TLVP_GET(&tp, NM_IPAC_EIE_CIPH_ALGOS)) != NULL)
+		ipacc_parse_supp_flags(foh, abis_nm_ipacc_ciph_algo_desc, e, "Ciphering algorithm");
+	if ((e = TLVP_GET(&tp, NM_IPAC_EIE_CHAN_TYPES)) != NULL)
+		ipacc_parse_supp_flags(foh, abis_nm_ipacc_chant_desc, e, "Channel type");
+	if ((e = TLVP_GET(&tp, NM_IPAC_EIE_CHAN_MODES)) != NULL)
+		ipacc_parse_supp_flags(foh, abis_nm_ipacc_chanm_desc, e, "Channel mode");
+	if ((e = TLVP_GET(&tp, NM_IPAC_EIE_GPRS_CODING)) != NULL)
+		ipacc_parse_supp_flags(foh, abis_nm_ipacc_gprs_coding_desc, e, "GPRS Coding Scheme");
+	if ((e = TLVP_GET(&tp, NM_IPAC_EIE_RTP_FEATURES)) != NULL)
+		ipacc_parse_supp_flags(foh, abis_nm_ipacc_rtp_feat_desc, e, "RTP Feature");
+	if ((e = TLVP_GET(&tp, NM_IPAC_EIE_RSL_FEATURES)) != NULL)
+		ipacc_parse_supp_flags(foh, abis_nm_ipacc_rsl_feat_desc, e, "RSL Feature");
+	if (TLVP_PRES_LEN(&tp, NM_IPAC_EIE_MAX_TA, 1)) {
+		uint8_t u8 = *TLVP_VAL(&tp, NM_IPAC_EIE_MAX_TA);
+		LOGPFOH(DNM, LOGL_DEBUG, foh, "Max Timing Advance %u\n", u8);
+	}
+
+	return 0;
+}
+
 /* 3GPP TS 52.021 section 8.6.1 Set BTS Attributes */
 struct msgb *nanobts_gen_set_bts_attr(struct gsm_bts *bts)
 {

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/src/osmo-bsc/bts_siemens_bs11.c -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/src/osmo-bsc/bts_siemens_bs11.c Changed

@@ -423,57 +423,35 @@
 
 	patch_nm_tables(trx->bts);
 
-	switch (trx->bts->type) {
-	case GSM_BTS_TYPE_BS11:
-		/* FIXME: discover this by fetching an attribute */
+	/* FIXME: discover this by fetching an attribute */
 #if 0
-		trx->nominal_power = 15; /* 15dBm == 30mW PA configuration */
+	trx->nominal_power = 15; /* 15dBm == 30mW PA configuration */
 #else
-		trx->nominal_power = 24; /* 24dBm == 250mW PA configuration */
+	trx->nominal_power = 24; /* 24dBm == 250mW PA configuration */
 #endif
-		abis_nm_conn_terr_sign(trx, e1l->e1_nr, e1l->e1_ts,
-					e1l->e1_ts_ss);
-		abis_nm_establish_tei(trx->bts, trx->nr, e1l->e1_nr,
-				      e1l->e1_ts, e1l->e1_ts_ss, trx->rsl_tei_primary);
-
-		/* Set Radio Attributes */
-		if (trx == trx->bts->c0)
-			abis_nm_set_radio_attr(trx, bs11_attr_radio,
-					       sizeof(bs11_attr_radio));
-		else {
-			uint8_t trx1_attr_radiosizeof(bs11_attr_radio);
-			uint8_t arfcn_low = trx->arfcn & 0xff;
-			uint8_t arfcn_high = (trx->arfcn >> 8) & 0x0f;
-			memcpy(trx1_attr_radio, bs11_attr_radio,
-				sizeof(trx1_attr_radio));
-
-			/* patch ARFCN into TRX Attributes */
-			trx1_attr_radio2 &= 0xf0;
-			trx1_attr_radio2 |= arfcn_high;
-			trx1_attr_radio3 = arfcn_low;
-
-			abis_nm_set_radio_attr(trx, trx1_attr_radio,
-					       sizeof(trx1_attr_radio));
-		}
-		break;
-	case GSM_BTS_TYPE_NANOBTS:
-		switch (trx->bts->band) {
-		case GSM_BAND_850:
-		case GSM_BAND_900:
-			trx->nominal_power = 20;
-			break;
-		case GSM_BAND_1800:
-		case GSM_BAND_1900:
-			trx->nominal_power = 23;
-			break;
-		default:
-			LOGP(DNM, LOGL_ERROR, "Unsupported nanoBTS GSM band %s\n",
-				gsm_band_name(trx->bts->band));
-			break;
-		}
-		break;
-	default:
-		break;
+	abis_nm_conn_terr_sign(trx, e1l->e1_nr, e1l->e1_ts,
+				e1l->e1_ts_ss);
+	abis_nm_establish_tei(trx->bts, trx->nr, e1l->e1_nr,
+			      e1l->e1_ts, e1l->e1_ts_ss, trx->rsl_tei_primary);
+
+	/* Set Radio Attributes */
+	if (trx == trx->bts->c0)
+		abis_nm_set_radio_attr(trx, bs11_attr_radio,
+				       sizeof(bs11_attr_radio));
+	else {
+		uint8_t trx1_attr_radiosizeof(bs11_attr_radio);
+		uint8_t arfcn_low = trx->arfcn & 0xff;
+		uint8_t arfcn_high = (trx->arfcn >> 8) & 0x0f;
+		memcpy(trx1_attr_radio, bs11_attr_radio,
+			sizeof(trx1_attr_radio));
+
+		/* patch ARFCN into TRX Attributes */
+		trx1_attr_radio2 &= 0xf0;
+		trx1_attr_radio2 |= arfcn_high;
+		trx1_attr_radio3 = arfcn_low;
+
+		abis_nm_set_radio_attr(trx, trx1_attr_radio,
+				       sizeof(trx1_attr_radio));
 	}
 
 	for (i = 0; i < TRX_NR_TS; i++)
@@ -484,17 +462,11 @@
 {
 	struct gsm_bts_trx *trx;
 
-	switch (bts->type) {
-	case GSM_BTS_TYPE_BS11:
-		patch_nm_tables(bts);
-		abis_nm_raw_msg(bts, sizeof(msg_1), msg_1); /* set BTS SiteMgr attr*/
-		abis_nm_set_bts_attr(bts, bs11_attr_bts, sizeof(bs11_attr_bts));
-		abis_nm_raw_msg(bts, sizeof(msg_3), msg_3); /* set BTS handover attr */
-		abis_nm_raw_msg(bts, sizeof(msg_4), msg_4); /* set BTS power control attr */
-		break;
-	default:
-		break;
-	}
+	patch_nm_tables(bts);
+	abis_nm_raw_msg(bts, sizeof(msg_1), msg_1); /* set BTS SiteMgr attr*/
+	abis_nm_set_bts_attr(bts, bs11_attr_bts, sizeof(bs11_attr_bts));
+	abis_nm_raw_msg(bts, sizeof(msg_3), msg_3); /* set BTS handover attr */
+	abis_nm_raw_msg(bts, sizeof(msg_4), msg_4); /* set BTS power control attr */
 
 	llist_for_each_entry(trx, &bts->trx_list, list)
 		nm_reconfig_trx(trx);

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/src/osmo-bsc/nm_bb_transc_fsm.c -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/src/osmo-bsc/nm_bb_transc_fsm.c Changed

@@ -111,13 +111,18 @@
 
 	/* Request TRX-level attributes */
 	if (!bb_transc->mo.get_attr_sent && !bb_transc->mo.get_attr_rep_received) {
-		bb_transc->mo.get_attr_sent = true;
-		/* N. B: we rely on attribute order when parsing response in abis_nm_rx_get_attr_resp() */
-		const uint8_t trx_attr = { NM_ATT_MANUF_STATE, NM_ATT_SW_CONFIG, NM_ATT_IPACC_SUPP_FEATURES };
-		/* we should not request more attributes than we're ready to handle */
-		OSMO_ASSERT(sizeof(trx_attr) < MAX_BTS_ATTR);
+		uint8_t attr_buf3; /* enlarge if needed */
+		uint8_t *ptr = &attr_buf0;
+
+		*(ptr++) = NM_ATT_MANUF_STATE;
+		*(ptr++) = NM_ATT_SW_CONFIG;
+		if (is_ipa_abisip_bts(trx->bts))
+			*(ptr++) = NM_ATT_IPACC_SUPP_FEATURES;
+
+		OSMO_ASSERT((ptr - attr_buf) <= sizeof(attr_buf));
 		abis_nm_get_attr(trx->bts, NM_OC_BASEB_TRANSC, 0, trx->nr, 0xff,
-				 trx_attr, sizeof(trx_attr));
+				 &attr_buf0, (ptr - attr_buf));
+		bb_transc->mo.get_attr_sent = true;
 	}
 
 	if (bb_transc->mo.get_attr_rep_received &&

osmo-bsc_1.11.0.1.c4b330.202309130026.tar.xz/src/osmo-bsc/nm_bts_fsm.c -> osmo-bsc_1.11.0.6.c3446.202309140026.tar.xz/src/osmo-bsc/nm_bts_fsm.c Changed

Changes of Revision 452