Osmocom Open Build Service

osmo-pcu.spec Changed

osmo-pcu_1.3.1.6.952f.202310232026.dsc -> osmo-pcu_1.3.1.7.4614.202310242026.dsc Changed

@@ -2,7 +2,7 @@
 Source: osmo-pcu
 Binary: osmo-pcu, osmo-pcu-dbg, osmo-pcu-doc
 Architecture: any all
-Version: 1.3.1.6.952f.202310232026
+Version: 1.3.1.7.4614.202310242026
 Maintainer: Osmocom team <openbsc@lists.osmocom.org>
 Homepage: http://osmocom.org/projects/osmopcu
 Standards-Version: 3.9.8
@@ -14,8 +14,8 @@
  osmo-pcu-dbg deb debug extra arch=any
  osmo-pcu-doc deb doc optional arch=all
 Checksums-Sha1:
- e138f5fb03e831c58b867476919ebfce058849f9 429564 osmo-pcu_1.3.1.6.952f.202310232026.tar.xz
+ 913e29cb629cc1f8633f77883c7d07844500fd01 429608 osmo-pcu_1.3.1.7.4614.202310242026.tar.xz
 Checksums-Sha256:
- 0ec96841476e9ea3ab8175851995f0d76ff495c868c2af6fbd25d4189095c71b 429564 osmo-pcu_1.3.1.6.952f.202310232026.tar.xz
+ d8ef8bbcf4adb63553162194f591cc7fd1625ba23ae418f5a1db1cee4ba21584 429608 osmo-pcu_1.3.1.7.4614.202310242026.tar.xz
 Files:
- 748a9d5e96f12e6a7c12fdb4cc1ae268 429564 osmo-pcu_1.3.1.6.952f.202310232026.tar.xz
+ 1dc1663be43c0a1f9bca7377aab88be5 429608 osmo-pcu_1.3.1.7.4614.202310242026.tar.xz

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/.tarball-version -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/.tarball-version Changed

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/contrib/osmo-pcu.spec.in -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/contrib/osmo-pcu.spec.in Changed

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/debian/changelog -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/debian/changelog Changed

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/debian/control -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/debian/control Changed

@@ -16,7 +16,7 @@
 
 Package: osmo-pcu
 Architecture: any
-Depends: osmocom-nightly (= 202310232026), ${shlibs:Depends}, ${misc:Depends}
+Depends: osmocom-nightly (= 202310242026), ${shlibs:Depends}, ${misc:Depends}
 Description: Osmocom GPRS/EDGE Packet Control Unit (PCU)
  The GPRS Packet Control Unit is co-located with the GSM BTS or GSM BSC
  in order to provide packet-switched services for 2G (2.5G, 2.75G)
@@ -28,7 +28,7 @@
 Architecture: any
 Section: debug
 Priority: extra
-Depends: osmocom-nightly (= 202310232026), osmo-pcu (= ${binary:Version}),
+Depends: osmocom-nightly (= 202310242026), osmo-pcu (= ${binary:Version}),
          ${misc:Depends}
 Description: Debug symbols for the Osmocom GPRS/EDGE Packet Control Unit (PCU)
  The GPRS Packet Control Unit is co-located with the GSM BTS or GSM BSC
@@ -41,7 +41,7 @@
 Architecture: all
 Section: doc
 Priority: optional
-Depends: osmocom-nightly (= 202310232026), ${misc:Depends}
+Depends: osmocom-nightly (= 202310242026), ${misc:Depends}
 Description: ${misc:Package} PDF documentation
  Various manuals: user manual, VTY reference manual and/or
  protocol/interface manuals.

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/include/osmocom/pcu/pcuif_proto.h -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/include/osmocom/pcu/pcuif_proto.h Changed

@@ -13,7 +13,6 @@
 
 /* msg_type */
 #define PCU_IF_MSG_DATA_REQ	0x00	/* send data to given channel */
-#define PCU_IF_MSG_DATA_CNF	0x01	/* confirm (e.g. transmission on PCH) */
 #define PCU_IF_MSG_DATA_IND	0x02	/* receive data from given channel */
 #define PCU_IF_MSG_SUSP_REQ	0x03	/* BTS forwards GPRS SUSP REQ to PCU */
 #define PCU_IF_MSG_APP_INFO_REQ	0x04	/* BTS asks PCU to transmit APP INFO via PACCH */
@@ -35,8 +34,6 @@
 
 /* sapi */
 #define PCU_IF_SAPI_RACH	0x01	/* channel request on CCCH */
-#define PCU_IF_SAPI_AGCH	0x02	/* assignment on AGCH */
-#define PCU_IF_SAPI_PCH		0x03	/* paging/assignment on PCH */
 #define PCU_IF_SAPI_BCCH	0x04	/* SI on BCCH */
 #define PCU_IF_SAPI_PDTCH	0x05	/* packet data/control/ccch block */
 #define PCU_IF_SAPI_PRACH	0x06	/* packet random access channel */
@@ -297,7 +294,6 @@
 
 	union {
 		struct gsm_pcu_if_data		data_req;
-		struct gsm_pcu_if_data		data_cnf;
 		struct gsm_pcu_if_data_cnf	data_cnf2;
 		struct gsm_pcu_if_data		data_ind;
 		struct gsm_pcu_if_susp_req	susp_req;

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/src/bts.cpp -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/src/bts.cpp Changed

@@ -1033,10 +1033,7 @@
 		rip->burst_type);
 	bts_do_rate_ctr_inc(bts, CTR_IMMEDIATE_ASSIGN_UL_TBF);
 	if (plen >= 0) {
-		if (the_pcu->pcu_if_version >= 0x0b)
-			pcu_l1if_tx_agch2(bts, bv, plen, false, GSM_RESERVED_TMSI);
-		else
-			pcu_l1if_tx_agch(bts, bv, plen);
+		pcu_l1if_tx_agch2(bts, bv, plen, false, GSM_RESERVED_TMSI);
 		rc = 0;
 	} else {
 		rc = plen;
@@ -1050,12 +1047,8 @@
 		bv, rip->ra, rip->rfn, rip->burst_type,
 		(uint8_t)osmo_tdef_get(bts->T_defs_bts, 3142, OSMO_TDEF_S, -1));
 	bts_do_rate_ctr_inc(bts, CTR_IMMEDIATE_ASSIGN_REJ);
-	if (plen >= 0) {
-		if (the_pcu->pcu_if_version >= 0x0b)
-			pcu_l1if_tx_agch2(bts, bv, plen, false, GSM_RESERVED_TMSI);
-		else
-			pcu_l1if_tx_agch(bts, bv, plen);
-	}
+	if (plen >= 0)
+		pcu_l1if_tx_agch2(bts, bv, plen, false, GSM_RESERVED_TMSI);
 	bitvec_free(bv);
 	/* rc was already properly set before goto */
 	return rc;
@@ -1136,24 +1129,20 @@
 	if (plen >= 0) {
 		bts_do_rate_ctr_inc(bts, CTR_IMMEDIATE_ASSIGN_DL_TBF);
 
-		if (the_pcu->pcu_if_version >= 0x0b) {
-			if (ms_imsi_is_valid(tbf->ms())) {
-				pcu_l1if_tx_pch2(bts, immediate_assignment, plen, true, tbf->imsi(), tbf->tlli());
-			} else {
-				/* During GMM ATTACH REQUEST, the IMSI is not yet known to the PCU or SGSN. (It is
-				 * requested after the GMM ATTACH REQUEST with the GMM IDENTITY REQUEST.) When the PCU
-				 * has to assign a DL TBF but the IMSI is not known, then the IMMEDIATE ASSIGNMENT is
-				 * sent on the AGCH. The reason for this is that without an IMSI we can not calculate
-				 + the paging group, which would be necessary for transmission on PCH. Since the IMSI
-				 * is usually only unknown during the GMM ATTACH REQUEST, we may assume that the MS
-				 * is in non-DRX mode and hence it is listening on all CCCH blocks, including AGCH.
-				 *
-				 * See also: 3gpp TS 44.060, section 5.5.1.5
-				 *           3gpp TS 45.002, section 6.5.3, 6.5.6 */
-				pcu_l1if_tx_agch2(bts, immediate_assignment, plen, true, tbf->tlli());
-			}
+		if (ms_imsi_is_valid(tbf->ms())) {
+			pcu_l1if_tx_pch2(bts, immediate_assignment, plen, true, tbf->imsi(), tbf->tlli());
 		} else {
-			pcu_l1if_tx_pch(bts, immediate_assignment, plen, tbf->imsi());
+			/* During GMM ATTACH REQUEST, the IMSI is not yet known to the PCU or SGSN. (It is
+			 * requested after the GMM ATTACH REQUEST with the GMM IDENTITY REQUEST.) When the PCU
+			 * has to assign a DL TBF but the IMSI is not known, then the IMMEDIATE ASSIGNMENT is
+			 * sent on the AGCH. The reason for this is that without an IMSI we can not calculate
+			 * the paging group, which would be necessary for transmission on PCH. Since the IMSI
+			 * is usually only unknown during the GMM ATTACH REQUEST, we may assume that the MS
+			 * is in non-DRX mode and hence it is listening on all CCCH blocks, including AGCH.
+			 *
+			 * See also: 3gpp TS 44.060, section 5.5.1.5
+			 *           3gpp TS 45.002, section 6.5.3, 6.5.6 */
+			pcu_l1if_tx_agch2(bts, immediate_assignment, plen, true, tbf->tlli());
 		}
 	}

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/src/gprs_rlcmac.c -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/src/gprs_rlcmac.c Changed

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/src/pcu_l1_if.cpp -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/src/pcu_l1_if.cpp Changed

@@ -249,22 +249,6 @@
 	pcu_tx_data_req(bts, trx, ts, PCU_IF_SAPI_PTCCH, arfcn, fn, block_nr, data, data_len);
 }
 
-void pcu_l1if_tx_agch(struct gprs_rlcmac_bts *bts, bitvec *block, int plen)
-{
-	/* TODO: When PCUIF v.11 has become mainline, we will use pcu_l1if_tx_agch2() exclusively.
-	 * This will make this function obsolote, so we can remove it. */
-	uint8_t dataGSM_MACBLOCK_LEN; /* prefix PLEN */
-
-	/* FIXME: why does OpenBTS has no PLEN and no fill in message? */
-	bitvec_pack(block, data + 1);
-	data0 = (plen << 2) | 0x01;
-
-	if (the_pcu->gsmtap_categ_mask & (1 << PCU_GSMTAP_C_DL_AGCH))
-		gsmtap_send(the_pcu->gsmtap, 0, 0, GSMTAP_CHANNEL_AGCH, 0, 0, 0, 0, data, GSM_MACBLOCK_LEN);
-
-	pcu_tx_data_req(bts, 0, 0, PCU_IF_SAPI_AGCH, 0, 0, 0, data, sizeof(data));
-}
-
 /* Send a MAC block via the access grant channel. This will (obviously) only work for MAC blocks that contain
  * an IMMEDIATE ASSIGNMENT. In case the confirm flag is set, the receiving end is required to send a confirmation
  * back when the IMMEDIATE ASSIGNMENT has been sent. */
@@ -283,43 +267,6 @@
 	pcu_tx_data_req(bts, 0, 0, PCU_IF_SAPI_AGCH_2, 0, 0, 0, (uint8_t*)&agch, sizeof(agch));
 }
 
-#define IMSI_DIGITS_FOR_PAGING 3
-/* Send a MAC block via the paging channel. (See also comment below) */
-void pcu_l1if_tx_pch(struct gprs_rlcmac_bts *bts, bitvec *block, int plen, const char *imsi)
-{
-	/* TODO: When PCUIF v.11 has become mainline, we will use pcu_l1if_tx_pch2() exclusively.
-	 * This will make this function obsolote, so we can remove it. */
-
-	uint8_t dataIMSI_DIGITS_FOR_PAGING + GSM_MACBLOCK_LEN;
-
-	/* prepend last three IMSI digits (if present) from which BTS/BSC will calculate the paging group */
-	if (imsi && strlen(imsi) >= IMSI_DIGITS_FOR_PAGING)
-		memcpy(data, imsi + strlen(imsi) - IMSI_DIGITS_FOR_PAGING, IMSI_DIGITS_FOR_PAGING);
-	else
-		memset(data, '0', IMSI_DIGITS_FOR_PAGING);
-
-	/* OS#6097: if strlen(imsi) == 0: We assume the MS is in non-DRX
-	 * mode (TS 44.060 5.5.1.5) and hence it is listening on all CCCH blocks
-	 * (TS 45.002 6.5.3, 6.5.6).
-	 * Hence, pgroup 000 is taken "randomly" to send it over it. This of
-	 * course not optimal since it can actually be sent on any CCCH blocks,
-	 * so we are delaying the ImmAss for no good reason. But anyway,
-	 * pcu_l1if_tx_pch() is deprecated and pcu_l1if_tx_pch2() should be
-	 * used instead, which doesn't suffer from this problem.
-	 */
-
-	/* block provided by upper layer comes without first byte (plen), prepend it manually: */
-	OSMO_ASSERT(sizeof(data) >= IMSI_DIGITS_FOR_PAGING + 1 + block->data_len);
-	dataIMSI_DIGITS_FOR_PAGING = (plen << 2) | 0x01;
-	bitvec_pack(block, data + IMSI_DIGITS_FOR_PAGING + 1);
-
-	if (the_pcu->gsmtap_categ_mask & (1 << PCU_GSMTAP_C_DL_PCH))
-		gsmtap_send(the_pcu->gsmtap, 0, 0, GSMTAP_CHANNEL_PCH, 0, 0, 0, 0,
-			    data + IMSI_DIGITS_FOR_PAGING, GSM_MACBLOCK_LEN);
-
-	pcu_tx_data_req(bts, 0, 0, PCU_IF_SAPI_PCH, 0, 0, 0, data, sizeof(data));
-}
-
 /* Send a MAC block via the paging channel. This will (obviously) only work for MAC blocks that contain an
  * IMMEDIATE ASSIGNMENT or a PAGING COMMAND message. In case the MAC block contains an IMMEDIATE ASSIGNMENT
  * message, the receiving end is required to confirm when the IMMEDIATE ASSIGNMENT has been sent. */
@@ -556,26 +503,6 @@
 	return rc;
 }
 
-static int pcu_rx_data_cnf(struct gprs_rlcmac_bts *bts, struct gsm_pcu_if_data *data_cnf)
-{
-	int rc = 0;
-
-	LOGP(DL1IF, LOGL_DEBUG, "Data confirm received: sapi=%d\n", data_cnf->sapi);
-
-	switch (data_cnf->sapi) {
-	case PCU_IF_SAPI_PCH:
-		if (data_cnf->data2 == GSM48_MT_RR_IMM_ASS)
-			bts_rcv_imm_ass_cnf(bts, data_cnf->data, GSM_RESERVED_TMSI);
-		break;
-	default:
-		LOGP(DL1IF, LOGL_ERROR, "Received PCU data confirm with "
-			"unsupported sapi %d\n", data_cnf->sapi);
-		rc = -EINVAL;
-	}
-
-	return rc;
-}
-
 static int pcu_rx_data_cnf2(struct gprs_rlcmac_bts *bts, struct gsm_pcu_if_data_cnf *data_cnf)
 {
 	int rc = 0;
@@ -809,14 +736,7 @@
 
 	LOGP(DL1IF, LOGL_DEBUG, "Info indication received:\n");
 
-	/* NOTE: The classic way to confirm an IMMEDIATE assignment is to send the whole MAC block payload back to the
-	 * PCU. So it is the MAC block itsself that serves a reference for the confirmation. This method has certain
-	 * disadvantages so it was replaced with a method that uses the TLLI as a reference (msg_id). This new
-	 * method will replace the old one. The code that handles the old method will be removed in the foreseeable
-	 * future. (see also OS#5927) */
-	if (info_ind->version == 0x0a) {
-		LOGP(DL1IF, LOGL_NOTICE, "PCUIF version 10 is deprecated. OS#5927\n");
-	} else if (info_ind->version != PCU_IF_VERSION) {
+	if (info_ind->version != PCU_IF_VERSION) {
 		fprintf(stderr, "PCU interface version number of BTS/BSC (%u) is different (%u).\nPlease use a BTS/BSC with a compatble interface!\n",
 			info_ind->version, PCU_IF_VERSION);
 		exit(-1);
@@ -1294,10 +1214,6 @@
 		CHECK_IF_MSG_SIZE(pcu_prim_length, pcu_prim->u.data_ind);
 		rc = pcu_rx_data_ind(bts, &pcu_prim->u.data_ind);
 		break;
-	case PCU_IF_MSG_DATA_CNF:
-		CHECK_IF_MSG_SIZE(pcu_prim_length, pcu_prim->u.data_cnf);
-		rc = pcu_rx_data_cnf(bts, &pcu_prim->u.data_cnf);
-		break;
 	case PCU_IF_MSG_DATA_CNF_2:
 		CHECK_IF_MSG_SIZE(pcu_prim_length, pcu_prim->u.data_cnf2);
 		rc = pcu_rx_data_cnf2(bts, &pcu_prim->u.data_cnf2);

osmo-pcu_1.3.1.6.952f.202310232026.tar.xz/tests/app_info/AppInfoTest.err -> osmo-pcu_1.3.1.7.4614.202310242026.tar.xz/tests/app_info/AppInfoTest.err Changed

@@ -23,7 +23,7 @@
 ws(64)
 MS(TA-220:MSCLS-10-11) Attaching DL TBF: TBF(DL:TFI-0-0-0:E){NEW}
 MS(TA-220:MSCLS-10-11:DL): + tbf: now used by 1 (tbf)
-(bts=0,trx=0,ts=0) FN=0 Sending data request: sapi=3 arfcn=0 cur_fn=-1 block=0 data=30 30 30 2d 06 3f 30 0e 00 00 7d 80 00 1c 00 df ff ff ff f8 00 00 03 2b 2b 2b 
+(bts=0,trx=0,ts=0) FN=0 Sending data request: sapi=9 arfcn=0 cur_fn=-1 block=0 data=ff ff ff ff 2d 06 3f 30 0e 00 00 7d 80 00 1c 00 df ff ff ff f8 00 00 03 2b 2b 2b 01 
 Creating MS object
 Modifying MS object, TLLI = 0xffffffff, MS class 0 -> 12
 Modifying MS object, TLLI = 0xffffffff, EGPRS MS class 0 -> 13
@@ -33,7 +33,7 @@
 ws(64)
 MS(TA-220:MSCLS-12-13) Attaching DL TBF: TBF(DL:TFI-0-0-1:E){NEW}
 MS(TA-220:MSCLS-12-13:DL): + tbf: now used by 1 (tbf)
-(bts=0,trx=0,ts=0) FN=0 Sending data request: sapi=3 arfcn=0 cur_fn=-1 block=0 data=30 30 30 2d 06 3f 30 0d 00 00 7d 80 00 1c 00 df ff ff ff f8 40 00 03 2b 2b 2b 
+(bts=0,trx=0,ts=0) FN=0 Sending data request: sapi=9 arfcn=0 cur_fn=-1 block=0 data=ff ff ff ff 2d 06 3f 30 0d 00 00 7d 80 00 1c 00 df ff ff ff f8 40 00 03 2b 2b 2b 01 
 
 --- test_sched_app_info_ok ---
 Application Information Request received: type=0x00000000 len=15

Changes of Revision 493